Penatron 4034
Rapid Floor Repair Polymer

Penatron 4034 is a revolutionary, rapid set, high strength, ultra-low viscosity concrete crack repair material. This two-part system is made up of 70% solids and designed for rebuilding broken control joints as well as repairing cracked and spalled concrete surfaces very quickly.

Surfaces fixed with Penatron 4034 can be put back into service in just 15 minutes after the installation is made. Great for:

Rebuilding control joints Shallow spalls and bridge decks Traffic area spalls and cracks repairs Grade matching Stops additional damage Fill and repair spall before coating Used to "knit" cracked slabs		Rapid setting and curing 4034 is ready for drive-over traffic in 15 minutes.

EZ Peel
Rapid Concrete Repair

E-Z Peel is a heavy gel/paste polymer compound used for rapid and temporary sealing of cracks in concrete for structural injection and sealing around injection ports. It is fast setting and flowable with low sag characteristics.

EZ-Peel contains a unique heat release additive that allows the product to be quickly removed after the injection material has set. EZ-Peel is easily spread with a paint brush, removed with a heat gun and peeled off with a putty knife after the injection material sets.

Penatron 4029 & 4031

Penatron 4029 and 4031 are low viscosity polyurea products with high-strength, high-impact resistance and very fast setting capability.

The Penatron 4029 and 4031 are used for injection right from the cartridge, making even small applications practical and economical. The Penatron 4029 and 4031 will find and fill tiny cracks in concrete and set in several minutes.

Penatron 4029 and 4031 are a semi-rigid non-brittle crack injection product very different from epoxy: Sets fast, even in cold temperatures Does not kep running out of the back of injection repairs where sealing is not possible Does not become brittle over time as epoxy does Is not moisture sensitive, does not foam or react with moisture Works in conjuncture with EZ Peel to make an easy-to-use, rapid injection system How the System Works: The ports are set over the crack and the crack and ports are sealed with EZ Peel, then allowed to set. Penetron 4029/4031 is injected into the sealed crack through the port via the static mixer. Injection is completed and the application sets for about 10 minutes. The EZ Peel is heated with a heat gun at one end of the application and stripped off quickly and easily, no grinding or sandblasting is necessary, leaving an unblemished surface. The job is complete and everything is done in one day, just a few hours instead of taking two to three days using epoxy sealers and injection products.

Control Joint & Expansion Joint Applications | Cold Storage Warehouse Applications
Concrete Maintenance & Repair | Bridge Header Applications
Airport Runway & Lighting Applications | Contact Us | Home Page

eNewsletter Sign-up