Fuel Immersion Tests  
Lap Shear Test - Fiberglass Tank Lap Joint
Tensile Pull Test - Tank Valve Bond Urethane Housing to Fiberglass Tank

Gasoline Immersion
Gas Immersion tests as performed by NTS, Test Report No. 377-2663, revision A, 8/12/03 page 1 of 1, test description on products listed as 800, 801 and B designation for 4036.
Products:  Penatron 4036, 800 & 801.    Application:  Standard cartridge application via duplex cartridge and static mixer.

test

#801                         #4036                           #800
 
3207 W. Warner Avenue Santa Ana, CA  92704 | (714) 966-2893 · Fax (714) 966-9105
Website design and hosting by World Wide Webmasters, Inc.
   
 

Picture of test samples after immersion test.  Test results were within acceptable ranges of weight gains within the 4% to 9% range.  No deformation or deterioration is noted upon examination of test samples after test.  Immersion from 07/15/03 to 07/18/03.  Additional samples have been retained in JP8, Diesel and gas with no deformation or deterioration over extended time of four weeks.

Complete Test Results
PDF Download

Featured Products

Polyurea,  Polyurea/Urethane, Advance Cure Epoxies, Urethane AcrylicAlong with Polyurea Containment & Protection, Aliphatic Polyurea Clear Coats & Chemical Resistant Polyurea, Fast Set Adhesives – Specialty Markets & Petroleum Tanks,  Airfield Lighting & Kerf Applications, Elastomeric Roof Coatings, Moisture Vapor Barriers For Concrete