Penatron 4034
Fast Set Concrete Repair Low Viscosity

3207 W. Warner Avenue Santa Ana, CA  92704 | (714) 966-2893 · Fax (714) 966-9105
Website design and hosting by World Wide Webmasters, Inc.
   
 

Product Description

Penatron 4034 is a very rapid set, high strength ultra low viscosity concrete repair polymer. This two part polymer system is designed for rapidly rebuilding deeply spalled or damaged concrete surfaces, broken control joints and repairing cracks in concrete rapidly even in cold   conditions.
Heavy Loads In 10 to 15 Minutes:  Penatron 4034 repairs are put back in service in minutes after the installation is made.   The Penatron 4034 is intended for use in damaged concrete, from parking decks to control joints or warehouse spalls.  This product is especially useful in these areas where "Down-time" is limited and a facility must operate around the clock.

Complete Description

PDF Download
Penatron 4034 – Sump/tank Leveling – Sensors

Penatron 4034 – Sump/tank Leveling – Sensors 

Gas station sumps with a rounded tank below the chimney access did not have a level enough surface for the environmental sensors to operate properly.
Penatron 4034 was used to create a hard surface and level the surface of the tank below so the sensors would activate properly and detect leakage.  The 4034 was applied via a LS pump unit with some aggregate over the rounded tank to form a floor.  When the product cured in about 10 to 15 minutes the 830 60/120 was used around the perimeter of the 4034 where the product meets the fiberglass wall.  

Featured Products

Polyurea,  Polyurea/Urethane, Advance Cure Epoxies, Urethane AcrylicAlong with Polyurea Containment & Protection, Aliphatic Polyurea Clear Coats & Chemical Resistant Polyurea, Fast Set Adhesives – Specialty Markets & Petroleum Tanks,  Airfield Lighting & Kerf Applications, Elastomeric Roof Coatings, Moisture Vapor Barriers For Concrete