Product Description

Penatron 3050 is an aromatic “Slow Set Polyurea” designed for use in interior vertical applications where a tough but flexible caulking is required.   
Penatron 3050 is designed with vertical hold and sets in about 3-5 minutes. The product has a high Shore A hardness,  90-95 and elongation of approximately 200%+
This is a 1:1 system and can be used via a duplex cartridge or the ASTC LS 1:1 electric pump.  Mixing is accomplished using a ½” x 30 element static mixer.  This two part polyurea is 100% solids, 100% polyurea.
Penatron 3050 may be immediately tooled or smoothed after placement or it is sheared to finished surface grade after the product has set firm enough to be cut

Cold Temperature Applications:  Heat the product overnight in the containers to 75°F-90°F and keep the product and equipment warm during the application.

Priming:  large opening, voids or vertical control joints should be primed using Penprime 7001 approximately 1 to 2 hours before the application of the 3050.

Moisture Vapor Reduction:  Penatron 3050 is compatible with CMW used in joints to reduce moisture vapor pressure on joint products.  

Featured Products

Polyurea,  Polyurea/Urethane, Advance Cure Epoxies, Urethane AcrylicAlong with Polyurea Containment & Protection, Aliphatic Polyurea Clear Coats & Chemical Resistant Polyurea, Fast Set Adhesives – Specialty Markets & Petroleum Tanks,  Airfield Lighting & Kerf Applications, Elastomeric Roof Coatings, Moisture Vapor Barriers For Concrete